Instructions / Assembly

STEP 8

A. Stick magnet to magnet plate on right door.

B. With left door open, close the right door. The magnet should be positioned over the wooden block

on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right

door. The magnet will be in the correct position on the block.

C. Secure magnet with the two round head screws in the magnet packet. Center screws in the slots in

the magnet . This will allow adjustment later, if needed.

NOTE: No pilot holes in block, as softwood!

Magnet (1)

5/8” Pan Head Screw (2)

2 Used

in this step