Installation Guide
Table of Contents
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods & ductless conversion..........7
Charcoal lters & electrical requirements.......8
Preparation......................................................9
Installation................................................10-11
Installation overview.....................................11
USE AND CARE
Range hood operations.............................12-13
Troubleshooting...........................................14
Use and care information...............................15
Specications..............................................15
Wiring diagram..............................................16
MAINTENANCE
Cleaning, replacing lter & light bulb.........17
WARRANTY
Coverage & exceptions.................................18
Disclaimer & contact information.................19
Tools needed:
Page 3
Level
Flat-blade and
Phillips screw-
drivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil