Installation

Check the range hood tag for lamp specifications. Halogen bulbs will not work on "LED"
models (they will lightly pulse or flash).
Before performing any task outside of basic operation, turn off the power supply and/or
unplug the unit.
Before attempting to handle the light bulbs, ensure the bulbs are cool to the touch,
including any adjacent working surfaces
Replacing The Light Bulb:
•
•
•
Light bulb become extremely hot when turned on. DO NOT touch bulb until
switched off and cooled. Touching hot bulbs could cause serious burns.
Hazard of Burns!
Maintenance (Continued)
Replacing LED Light Fixture:
•This range hood uses LED light fixture: 3W Max 12V LED
•Make sure the range hood is unplugged or turn OFF breaker and the lights are cool to
touch.
•Place a flat-head screwdriver between light housing and hood body, gently pry up the light
housing and search for the metal clip. (Recommended: use multiple layers of tape over the
screwdriver head to prevent any scratching of the finish)
•Apply force to the metal clip and pull out the light fixture. Disconnect the power cable and
discard the old light fixture.
•Reverse the steps to install a new halogen light fixture. Turn ON breaker and range hood
to test for operation.
Pg 19