晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Product Specifications CM-8822CU ac2x2+BT5.0 USB2.0 Version: 2.0 Manufacturer CC&C Technologies, Inc.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Revision History Version Date Change Description 1.0 03/19, 2019 Initial release 2.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Overview CM-8822CU is a WLAN 11ac and Bluetooth combo Module, provides a single USB interface to host, which fully supports the features and functional compliance of IEEE 802.11b/g/n/a/ac standards. Bluetooth v2.1 and v5.0 standards. It supports up to 866.7Mbps high-speed WLAN network connections and Bluetooth protocol stack.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 General Specification Model Name CM-8822CU Product Name ac2x2+BT5.0 USB2.0 Standard IEEE 802.11b/g/n/a/ac/ Bluetooth v2.1/v5.0 Data Transfer Rate Modulation Method Frequency Band WLAN: 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS0 to 7 for HT20MHz, MCS0 to 7 for HT40MHz 802.
晶訊科技股份有限公司 CC&C Technologies, Inc. Humidity Size 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 5 to 90 % maximum (non-condensing) 27 x 16.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Pin outs define: Pin Signal Input /Output Description WPS Pin(Active Low), shared with GPIO3 General Purpose Input/ Output Pin DC 3.3V 1 WPS Output 2 VDD Power 3 HSDM I/O USB 2.0 Transceiver Differential Pair 4 HSDP I/O USB 2.
晶訊科技股份有限公司 CC&C Technologies, Inc. The external circuit for WiFi activity LED display The external circuit for WiFi activity WPS display 7 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. Block Diagram 8 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 PCB Layout footprint The recommended layout pads for CM-8822CU module are shown below. (Module top view) All dimensions are in millimeters. Tolerance: +- 0.
晶訊科技股份有限公司 CC&C Technologies, Inc. 8F, No. 150, Jian Yi Road, Zhonghe District, New Taipei City, Taiwan 235, R.O.C. Tel: 886-2-8226-5088 Fax: 886-2-8226-5077 Reference Temperature Reflow Chart This module is surface mount device; please refer below conditions for drying before solder reflow processes. (extracted from IPC/JEDEC J-STD-033B.
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated RF Module. For 15 B (§15.107 and if applicable §15.107) compliance, the host manufacturer is required to show compliance with 15 while the module is installed and operating. Furthermore the module should be transmitting and the evaluation should confirm that the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally the integrator has to apply the appropriate equipment authorization (e.
Module statement The single-modular transmitter is a self-contained, physically delineated, component for which compliance can be demonstrated independent of the host operating conditions, and which complies with all eight requirements of § 15.212(a)(1) as summarized below. 1) The radio elements have the radio frequency circuitry shielded. 2) The module has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal.
- List of applicable FCC rules FCC Part 15.407, KDB 789033 D02 v02r01; FCC Part 15.247 - Summarize the specific operational use conditions This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This information also extends to the host manufacturer’s instruction manual. - Limited module procedures not applicable It is “not applicable” as trace antenna which is not used on the module.
Information on test modes and additional testing requirements. Information on test modes: The host manufacturer can use software for access to the test modes. Connected to the device through the serial port of the host product and control the module. If it does not work, then the host product manufacturer should coordinate with the module manufacturer for access to test mode software. The following provides guidance to host product when installing this module on how they may verify the end product: A.
