Instruction manual

9
fig. 5
fig. 4fig. 3
Reversing the Door
We recommend you seek the help of another individual to support the doors whilst performing this operation.
1. Remove the two screws fixing the central hinge to the appliance and the central cover caps on the left side (fig. 3).
2. Remove the fridge and freezer doors by pulling both away from the appliance, along with the central hinge (fig. 4)
3. Remove the kick plate by pulling forwards. Remove the lower hinge fixing screws and the lower hinge. Unscrew the lower
hinge pin from position 1 in fig. 5, rotate the lower hinge 90º and then screw the hinge pin into position 2. Relocate the lower
hinge into position on the left hand side using the lower hinge fixing screws.
4. Locate the central cover caps as shown.
fig. 6
Bottom
hinge
Kick plate
Hole 2
Hole 1