User's Manual

User Manual

1. Dials the telephone

Cell phone sets completed, you can call or answer the phone,

this section will provide you all the basic information.

Attention：

¾ Use the headphones, please put the light, the headset jack

1.1. Telephone switch

Call on

You may through long press the end key to turn on the handset. If

requests to input the PIN code, front please refer to the chapter

narration

Call off

On standby state press the key to the end key phone interfaces.

The interface appears down, down the clock and two options,

choose shutdown will achieve shutdown ； choose to close down and,

after the shutdown set the alarm will not be much. If you press the

right soft keys, can exit and turn it off the interface.

1.2. Phone Call

When the network operator’s words on the computer screen that

appears when entering standby, now you can call or answer the

phone.

display the upper-left corner of the pictures were given the

present network of signal intensity （ double with a signal that the

network when the quality of the obstructions ）.

Speak more important, so in the mobile could effectively increase

the strength of the signal from the screen.

the standby on the phone there are two ways ： a direct dialing,

and dial the telephone book.

1.2.1. DID Direct In-Dialling

Press any key enter dial the number of the interface. at the

interface to make the following operation ：