Binocular & Digital Camera Model #72204 /72205/72217
Cautions Cautions ˙Never immerse VistaPix into any fluid or liquid.Remove dust or stains with a soft cloth dampened with water or neutral detergent. Keep in a dry and cool dust-free environment or a container when it is not used. ˙ Avoid dropping VistaPi x.Do not disassemble VistaPi x. Usage of the battery ˙ Please always use Alkaline Battery(AAA Alkaline Battery). ˙ Please remove batteries when not using your VistaPix for long periods of time.
Product part identification 3 1 11 7 5 8 9 6 2 4 3 - 11 7 7 10 1. Diopter Knob(on underside) 6. USB Port 2. Center Focus Knob 7. Eyepiece 3. Objective Lens 8. Camera Lens 4. Power/Mode Button 9. LCD Screen 5. Shutter/Set Button 10. Battery Compartment Lid 11.
How To Use Your Binocular How to use your binocular WARNING ! Never use a VistaPix to look at the sun ! Looking at or near the sun will cause instant and irreversible damage to your eye. Eye damage is often painless, so there is no warning to the observer that damage has occurred until it is too late. Do not point the binocular at or near the sun.Children should always have adult supervision while observing...............................................................
How To Use Your Camera Attention!!: * To extend battery life remove the batteries when not using the camera.. Failure to do so will result in losing pictures and dead battery after several days. * When batteries are removed, memory of pictures can maintain for 30 seconds. Batteries must be replaced within 30 seconds to avoid losing pictures. Be sure VistaPix is OFF before replacing the batteries. Inserting Batteries Lift the battery compartment lid and insert two AAA size alkaline batteries.
Operation Instruction Continuous Shoot Mode 1.Press the Function button to select“ ”shown on the LCD. 2.Press and hold the Shutter button within 5 seconds. Notes: Under the continuous shooting mode, the photos are all taken in QVGA mode and can be downloaded individually. Taking 3 Photos Continuously 1.Press the Function button to select“ ”shown on the LCD. 2.Hold down Shutter button within 5 seconds and it will take 3 photos continuously. And saved as jpg format. Delete All Photos 1.
SOFTWARE INSTALLATION Yo u must install the PhotoImpression and driver before downloading the photos.................................................................................... 1. Please put the software CD into your computer and the install menu will be displayed automatically as shown below: ...................................... 2. Click the icon Install PhotoImpression, then follow the below steps to install it.
SOFTWARE INSTALLATION 3. Click the icon Install Driver, then follow the installation directions to install it. Tips Do not connect the camera to your computer during installing software. If the install menu does not appear on your screen automatically , follow the steps below. 1. Place the CD into your CD-ROM drive. 2. Press the "Start" button on your computer and select’’Run’’. 3.Enter E:\autorun.exe (If E is your CD-ROM drive letter). 4. Follow the directions of the installation.
DOWNLOAD PHOTOS Please follow the steps below to download the photos. 1. Connect your camera to computer with USB cable . 2. Double-click the PhotoImpression icon on your desktop. 3. Click the Camera / Scanner button. 4. Click the icon. 5. Select the photo you want to view and click OK. 6. Click Save. 7. Click Save As. 8. Input the file name and select the file type. Click Save to save your photo.
DOWNLOAD PHOTOS Step 7 Step 8 Tip: ‧Your photos downloaded will be automatically saved at the folder \\My Documents\MyPictures\ .
PC CAM FUNCTION ■ Browse Live 1.Connect your camera to the computer with the USB cable correctly. 2.Double-click the PhotoImpression icon on your desktop. 3.Click the icon Camera/Scanner. 4.Click the Video Camera symbol . You will see the dialog box displayed as below. ■ Functions Introduction Sources :You can set the Brightness,Cotrast and the other camera controls Select “Default” and press “OK”.
PC CAM FUNCTION If your operation system is Windows XP, you may need to take the following steps. 1. Connect your camera to the computer with the USB cable. 2. Double-click My Computer icon on the desktop. 3. Double-click DaulCamera icon . You can browse live via your camera now. 4. Click Take a New Picture button. The picture you are browsing will be captured. 5. Select the picture you captured, click Copy this file to save your picture. 6. Select the place you want to copy this photo, then click Copy.
Troubleshooting ■ For Taking Photos Q:There are color spots or stripes layers and segments on my photos. A: This is caused by camera`s internal program loop, the factors might be caused from using the non-alkaline or low batteries. Please turn off all the power. (including USB cable and batteries), then turn on after 10 seconds. Q: Why my photo was blurred? A: The camera was shaking during shooting. Please hold the camera steadily.
Troubleshooting ■ For Downloading Photos Q: Can I connect the camera to the computer when I install the driver? A: No, the camera should not be connected when installing the driver. Q: After I finished installing the software, when I download the photos from my camera, there is an icon showing “ no photos in camera ? ” . A: First make sure that you have taken photos already, then check the total number of the photos showing on the camera`s LCD.
