Operating instructions celexon PTZ Camera Full HD Video Conference System VKS2040 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting or operating this product. Please retain these instructions for future use.
SAFETY INSTRUCTIONS Please read and follow all the safety instructions below and on the product before connecting the camera to a power source. Failure to comply with the safety instructions may result in fire, electric shock, or personal injury, and could affect the safety features contained in the unit. Please retain all safety instructions. • All accessories and cables must be removed before transporting the camera. • Do not grasp the camera head when transporting the camera.
• The camera must not be used outside the specified temperature,humidity and power ranges. • Unplug the camera from the mains if you need to clean it. Only use a soft, dry cloth to clean the camera and camera lens. Never use alcohol, solvents or ammonia-based liquids on this camera. • Wash your hands after handling the cables supplied with this camera. • The remote control of the camera uses batteries. Make sure that the polarity of the batteries (+/-) is correctly aligned.
IN THE BOX 1x PTZ camera 1x IR remote control 1x 12V power supply unit 1x Microphone & Loudspeaker 2x USB 2.0 cable CAMERA PARAMETERS Zoom 10x Image Sensor 1/ 2.8“ Exmor CMOS Pixels 2.7 Megapixel HOV 72° Resolution 1920x1080@30fps // 1280x720 // 640x480 640x360 // 352x288 // 320x240 Min. Illu 0.1Lux@F1.
PTZ CAMERA IN DETAIL Lens RS232 connector IR receiver eye USB 2.0 port On / Off indicator DC12V power connector Mute Quieter Louder REMOTE CONTROL FUNCTIONS Power P/T RST FLIP Camera Select BLC MENU Navigation PRESET RESET FOCUS ZOOM Numbers On / Standby Camera starts alignment Camera image is rotated Select the camera to be controlled Switch BLC on/off Open / Close Menu Home = Align camera centrally Preset + number 1-9 = preset save Reset + number 1-9 = reset stored preset Auto = auto.
INSTALLATION Always connect the camera in the same way, regardless of whether the camera is connected to a permanently installed PC or a mobile laptop. 1) Connect the camera to the DC12V power supply and plug it in to power. As soon as the LED (3) lights up, the camera is switched on and ready for operation. Note: Make sure that the camera is free of packaging material and that no objects are blocking the camera‘s range of movements. The camera will centre itself in the beginning.
INFORMATION ON UK CONFORMITY Manufacturer: celexon Europe GmbH Adress: Gutenbergstraße 2, 48282 Emsdetten, DE Productname: celexon PTZ Camera Full HD Video Conference System VKS2040 Products that are marked with the UKCA mark meet all requirements of the relevant UK directives. The UK declaration of conformity can be downloaded at the following address at: www.celexon.de/zertifikate The symbol indicates the separate collection of electrical and electronic equipment in EU countries.
