User's Manual

SKU 35915 For technical questions, please call 1-800-444-3353. Page 7
OPERATION
Step 1: Adjust the BOOM EXTENSION (10) to a weight limit position (See Figure 8) that
exceeds the weight you will be lifting. Securely tighten the BOLT (16), WASHER (24)
and NUT (28).
Figure 8 — Adjusting Boom Extension
Step 2: Move the Crane so that the HOOK & CHAIN (11) is directly above the item to be lifted.
Step 3: Securely attach the HOOK & CHAIN to the item.
Step 4: To raise the BOOM (9), turn the JACK’s (2) release valve fully clockwise (right). Insert
the HANDLE (3) into the JACK and pump (up and down) repeatedly until the item has
been lifted to the desired height.
Step 5: To lower the Crane, SLOWLY turn the JACK’s release valve counterclockwise (left).
WARNING:
Never stand under an object that is
being lifted by the Shop Crane. Be
aware of the possibility of a load
slipping off the HOOK & CHAIN (11).
An item that falls from the Crane can
cause serious injury.
CAUTION:
DO NOT MOVE THE CRANE WHEN UNDER LOAD. The Casters are
not designed to be rolled when the Crane is lifting heavy objects.
Note: Not to be used for aircraft purposes.
REV 10/04