User's Manual
Page 3For technical questions, please call 1-800-444-3353.SKU 39152
when operating the tool. Do not
use the tool while tired or under
the inuence of drugs, alcohol, or
medication. A moment of inattention
while operating the tool increases the
Dress properly. Do not wear loose b.
clothing or jewelry. Contain long
hair. Keep hair, clothing, and
gloves away from moving parts.
as a result of being caught in moving
parts.
Do not overreach. Keep proper c.
footing and balance at all times.
Proper footing and balance
enables better control of the tool in
unexpected situations.
d. Use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-duty work
gloves during use.
e. Always wear eye
protection. Wear ANSI-
approved safety goggles.
Tool use and care
Do not force the tool.a. Use the
correct tool for the application. The
safer at the rate for which the tool is
designed.
Store the tool when it is idle out b.
of reach of children and other
untrained persons. A tool is
dangerous in the hands of untrained
users.
Maintain the tool with care. c. Keep
a cutting tool sharp and clean. A
properly maintained tool, with sharp
cutting edges reduces the risk of
binding and is easier to control.
Check for misalignment or binding d.
of moving parts, breakage of
parts, and any other condition
that affects the tool’s operation.
If damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.
There is a risk of bursting if the tool is
damaged.
Use only accessories that are e.
identied by the manufacturer for
the specic tool model. Use of an
accessory not intended for use with
Service
Tool service must be performed a.
only by qualied repair personnel.
When servicing a tool, use only b.
identical replacement parts. Use
only authorized parts.
SAVE THESE
INSTRUCTIONS.