Brochure

241
www.centuryelectricmotor.com
Parts & Accessories
Base kits, capacitors, lug kits, length adapters, and other accessories may be used to modify and convert standard products for special
applications. Designed for quick installation, these accessories allow increased flexibility with minimum stock.
Adapter converts 5-1/2” diameter Century Fan Motors to 6-1/2”
diameter. The adapter can be easily mounted on standard, off-
the-shelf Century 48 Frame (5-1/2”) Fan and Blower Motors. The
motor, with adapter mounted, can be used to replace most old
standard and special 56 Frame (6-1/2”) Fan Motors, Engineered
and tested for maximum reliability and versatility.
Use on 5” & 5-1/2” Century-extended through bolt motors to gain
additional length to fit in old base. Kit contains adapter plate with
mounting ring, (4) split rings, (8) nuts and (4) lock washers.
Fits 5” motors with a 90 degree bolt pattern and 5-1/2” motors
with 60-120 degree and 90 degree bolt patterns.
END FRAME LENGTH ADAPTER KIT
Part No. 615059-001
56 Frame C-Face Kits & ODP Deflector
48 TO 56 FRAME ADAPTER
FLEXIMOUNT ADAPTER
LUG MOUNTING BRACKET
FLEX MOUNTING BRACKET
PART NO. 619432-192
42 FRAME
PART NO. 619432-174
48 FRAME
Adapt standard 42 & 48 frame
motors to Fleximount.
Each adapter includes 3
grommets and 3 steel ferrules.
Bolt circle diameters for each
Large: 10.18
Small: 9.00
PART NO. 615157
For adapting 5-1/2” standard motors
to applications that require lugs
attached to motor shell.
Bolt circle diameter =
Minimum of 6-3/4”
Maximum of 7-3/4”
PART NO. HFM55
Heavy duty application
Motor diameter 5-5/8”
Each adapter includes
3 grommets and 3 ferrules
Bolt circle diameters for each
Large: 10.18
Small: 9.00
 Part Band
 Number Width
615467-001 3”
615467-002 1
1
⁄
2
”
 Part
 Number Description Enclosure
10392002* C-Face Kit ODP
17090001 Deflector ODP
10909202 C-Face Kit TEFC
PART NO. 625295
Fixed lug mount assembly for 5-1/2”
diameter motors. Includes grommets,
ferrules and screws.
Bolt circle diameter = 10-1/2”
DIRECT DRIVE BLOWER MOUNTING KIT
FLEX MOUNTING BRACKET
PART NO. HFM554
Heavy duty application
Motor diameter 5-5/8”
Each adapter includes
4 grommets and 4 ferrules
Bolt circle diameters for each
Large: 10.00
Small: 9.00
PART NO. HFM55
Replaces this type
of bracket
* The ODP C-Face must be installed in conjunction with the
deflector. Items must be ordered separately. Special note:
These kits are designed for the legacy Century® 56 frame
motors only. Not suitable for 56 frame farm motors or 56Z
frame models.