Installation guide

SCON-3074 Configuration

707112-001

DNS Secondary Name Server

Enter a value if you want to enable a secondary Domain Name Server to function as a backup to

the primary domain name server. If the user makes two queries to the primary server and they

are not answered, LINCS will direct up to two queries to the secondary Domain Name Server.

DNS/Ping Response Time

This timer, given in tenths of seconds, determines the amount of time that is allowed for a

DNS or a Ping request to be answered before determining that a timeout has occurred.

DNS Default Domain

Use this field to specify an optional default Domain Name system label. The label must not

exceed 63 characters. The starting and end characters must be alphanumeric, and the remaining

characters must be alphanumeric characters or hyphens. The default domain will be appended

to any queries that are not fully expressed. For example, sulu is translated to sulu.visara.com,

if visara.com is the default domain.

SNMP Trap IP Address

This Destination IP Address defines where to send SNMP traps generated by LINCS. If the

IP Address is undefined, or defined as all 0’s, traps are not generated. If non-zero, traps are

generated for link up, link down, cold start, and authentication errors.

SNMP Read Authentication String

This 16-character string is required by the Network Management Station (the SNMP client)

to access MIB variables in LINCS. If not configured, the default value of ‘public’ is used.

SNMP Write Authentication String

This 16-character string is required by the Network Management Station (the SNMP client)

to modify MIB variables in LINCS. If left blank, LINCS will default the string to ‘public’.

TCP/IP Options Panel

TCP/IP Options LINCS C8.2 Central Control

SNMP OPTIONS

System Location: ___________________________

___________________________

System Contact: _________________________________

System Name: _________________________________

TN3270 SERVER OPTIONS

TN3270E: Enable ATTN Key: Disable

SYSREQ Key: Disable

Keepalive/Timeout Method: Keepalive using Telnet NOP

Keepalive/Inactivity Timer (min): 05

PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done