Installation guide

25
Chapter 5. TN3270 Client Definitions
707112-001
Entry 4
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 00224 ___ ___ ___ ___ VisaraNCT PW 3270 Class: TN3270E_CLIENTS
The fourth entry is for a 1783/1683/1883/500LX/UCT or LINCS type of device connecting
in on port 224. Since no IP address is specified, any user connecting to port 224 will be
accepted. The user will be given a session out of the 3270 Host Class “TN3270E_CLIENTS”.
Entry 5
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 00225 207 016 182 000 Subnet 3270 Class: TN3270E_TEST
The fifth entry allows any user located on subnet 207.16.182.0, and connecting in on port 225
to get a session out of the 3270 Host Class “TN3270E_TEST”. There will be no challenge for
a password, and the clients will be required to handle command chaining if GEN’ed to be a
console. This type of entry might be used for VTAM users.
Entry 6
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 00227 207 015 182 121 VisaraNCT PW Disable __
This entry allows a 1783/1683/1883/500LX/UCT or LINCS user, connecting to port 227 to
get a menu of selections. The user must be connecting from the IP address 207.15.182.121
and will be challenged for a password when they connect.
Entry 7
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 01191 ___ ___ ___ ___ Client ID 3270 Class: ZOS_PROGRAMMERS
This entry requires the user connecting in on port 1191 to enter a valid User ID and password.
If a valid User ID and password is given, then a session from the 3270 Host Class called
‘ZOS_PROGRAMMERS’ will be given. Multiple users can connect through this same
definition, each using the same or different User ID and passwords, as long as they are valid.
Entry 8
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 02120 ___ ___ ___ ___ Client+CC PW OS390_prod4 03
This entry supports only TN3270 clients that provide their own handling of Command Chaining
sequences, if this entry is to connect the user to a console session. The user will be challenged
for the configured LINCS Telnet password when they connect to port 2120.
Entry 9
Line Port IP Address Type 3270 Host LU
—— —— ————— —— ———— —
FET1 02121 ___ ___ ___ ___ Client+CC ID OS390_prod4 04
This entry also supports only TN3270 clients that provide their own handling of Command
Chaining sequences for console sessions. In this case the user must provide a valid User ID
and password and connect to port 2121.