Installation guide

31707112-001
7. Configuration Complete
When configuring in Central Control mode, pressing PF10-Save on the Configuration Complete
panel causes all Configuration data to be examined for inconsistencies. If any inconsistencies
are present, a message will be displayed to direct you to the panel containing the error. Upon
paging to the panel in error, the specific warning message will be displayed. Configuration
data may NOT be saved as long as any inconsistencies exist.
Configuration Complete Panel
Configuration Complete LINCS C8.2 Central Control
System Disk Drive: Drive C
No Errors or Conflicts detected!
PF: 1-Menu 7-Back 9-Default 10-Save
Once the Configuration Data has been validated and saved, the Apply Configuration Changes
panel will be displayed.
System Disk Drive
This is a toggle field which indicates which disk to write the Configuration data to. The initial
value will be the drive which the data was read from. The field may be toggled to any drive
which contains a System disk. You must save the configuration to drive C to use the new
configuration for subsequent IMLs.
Apply Configuration Changes Panel
Apply Configuration Changes LINCS C8.2 Central Control
IML Option: IML Now
Supervisor Password: After IML
TN3270 Client Definitions: After IML
TELNET/TN3270 Password: After IML
PF: 1-Menu 10-Process
This panel selects when to IML, and when to apply the recently saved configuration changes.
PF10-Process causes all ‘Immediate’ changes to be applied. Once all immediate changes
have been applied, the IML options field will be processed.
PF1-Menu will take you back to the Configuration Main Menu.