Installation guide

SCON-3074 Configuration

707112-001

IML Option

This field toggles between:

None - No IML is performed. If any of the options have been toggled to ‘immediate’ and the

<PF10> key is pressed, the indicated changes will take effect.

IML Now - If <PF10> is pressed the SCON-3074 will reboot.

IML Later - Pressing <PF10> results in the IML Time Panel being displayed.

Supervisor Password

This field specifies when the new supervisor password will take.

Options are After IML (default) and Immediate.

TN3270 Client Definitions

Changes made to the TN3270 Client Definition Panel may be put into immediate affect by

selecting ‘Immediate’. Note that new TCP port definitions (a port number not already defined

elsewhere) will not take affect until after the next IML. TCP ports that are to be listened to by

LINCS are only activated at IML time.

TN3270 Password

This field specifies when the new password used by TN3270 clients will take affect. Options

are After IML (default) and Immediate.

IML Time Panel

IML Time LINCS C8.2 Central Control

Time: HH MM SS Date: MM DD YYYY

16 03 00 03 28 2000

PF: 1-Menu 9-Refresh 10-Process

If you select to “IML Later” on the Apply Configuration Changes and process it, the IML

Time panel will appear. On this panel you may enter the time and the date when you want the

SCON-3074 to IML. The time set for IML can be cancelled later if needed by going into the

IML panel under the Supervisor Menu in Central Control Mode.