Installation guide

39
Appendix A. RPQs
707112-001
Send TN3270 connection confirmation to device
When enabled, LINCS sends a NVT message to the client once they have successfully
negotiated a TN3270 session with us, to acknowledge success. Not all clients are capable of
displaying a NVT message once they have negotiated TN3270 options. In most cases the host
will almost immediately write to the device, so the message normally will be display most
briefly if at all. Only if the host does not write to the screen and if the device is capable of
displaying NVT messages once in binary mode, does this RPQ provide useful information.
Suppress the automatic CLEAR key when connecting to a
Shared Session
Normally, a CLEAR key is automatically generated to refresh the console screen to a user
when connecting to a Hot Session, but when the session is also to be shared this may not be
desirable. This RPQ allows you to suppress the automatic CLEAR key.
During TN3270E negotiation, always tell client what LU
was assigned
Normally, LINCS only tells the client which resource was assigned, only if the client requests
a specific resource. With this RPQ enabled, LINCS will always tell the client which resource
was assigned. (This is required to make the Passport client work correctly.)