Installation Guide

3. INSTALLATION (Before You Start...)

1. Read this manual carefully and completely.

2. Chambers® range hoods conform to ETL/CSA standards. Check your local

building codes for any additional requirements.

3. The appliance has been manufactured as Class I, therefore a ground

connection is necessary. A 110/120V power cord with plug is provided. The

range hood must be installed so that the plug is easily accessible.

4. This appliance has been designed for use in both ducted and recirculating

modes, follow the appropriate installation method. (For recirculation mode

a kit is required – not included. Contact Chambers® to determine if a kit is

available for your hood.)

5. Your cooker hood can be connected as below by means of an extraction

duct (enamel, aluminum, flexible pipe or inflammable material with an

interior diameter of 6”.)

6. Before installation, turn the unit off and unplug it from the outlet.