User's Manual

DRAIN TRAY - ROTARY GLASSWASHER (0712551 (FLAT) OR 0712734 (CURVED))

0512967

PAGE 1 of 1

INSTALLATION INSTRUCTIONS

PARTS LIST:

INSTRUCTIONS:

ITEM DESCRIPTION QTY/PER

0512717 TRAY, DRAIN FLAT MOLDED (included with 0712551 kit - ﬂat front) 1

0512719 SCREEN, DRAIN TRAY FLAT (included with 0712551 kit - ﬂat front) 1

0512718 TRAY, DRAIN CURVED MOLDED (included with 0712734 kit - curved front) 1

0512720 SCREEN, DRAIN TRAY CURVED (included with 0712734 kit - curved front) 1

0512943 TUBE, DRAIN TRAY 1

0512946 NUT, 5/8-20 BULKHEAD, POLYPROPYLENE 2

0503716 GROMMET, RUBBER 5/8 ID X 1-1/8 OD X 5/16 THK 1

0507265 HOSE, BRAIDED PVC 5/8 ID X 7/8 OD X 2-1/2 LONG 1

0512977 CLAMP, NYLON 7/8 1

Remove left side pick-up plate allowing access to

internal button plug. Remove the internal button

plug and button plug on the front facia of the

machine.

Remove the activation swing arm.

Install the drain tray over the front edge ensuring

the swing arm receiver clears the hole provided.

The drain tube must line up with the pre-existing

hole.

Push the metal drain tube through the drain holes

so that it is fully extended into the machine

(pre-assembled nut is ﬁrm against the drain tray’s

grommet).

Screw the bulkhead nut to the drain tube that is

protruding into the the tank with the nut face

containing dimples facing the inside of the

machine. Attach braided hose to protruding end,

and secure using the provided hose clamp.

Ensure the hose is pointed slightly downward.

Replace the left pick-up plate and the activation

swing arm, ensuring the arm’s movement is not

hindered. Assemble the screen into the tray.

Drain Tray Conversion Kit Instructions