User's Manual

8
Dishwasher access doors are equipped with a door safety switch that automatically stops
the dishwasher pumps and conveyor drive if a door is raised while the dishwasher is
running. In addition, the dishwasher will not start if a door is left open.
1. If the dishwasher is running and a door is raised, then lighted GREEN START
pushbutton goes out and the pumps and conveyor drive stop.
2. Check the interior of the dishwasher for any dish racks still in the machine.
These dish racks must be washed again to ensure they are washed and sanitized
completely.
3. To restart the dishwasher, make sure all doors are closed, then push the GREEN
START pushbutton.
Refer to the illustration below and note the location of the pump intake screen and dual float
switch.
1. Make sure the pump intake screen is installed by sliding it on the bracket located in front
of the wash pump intake.
2. Make sure the float balls on the dual float switch move freely on the float stem.
3. Check the interior of the tank for any foreign objects and make sure the drain screen is
clean.
Pump Intake Screen and Dual Float Switch
Installation
Door Safety Switches
Pump Intake
Screen
Dual Float
Switch
Drain
Screen
Make sure tank is clean, the pump intake screen is installed and the dual float switch
moves freely.