User's Manual

38
Installation Instructions _______
 Section Assemby
Seal Section Joints
Section Assemby

1. Sectionjointsmustbesealed
withfoodgradesiliconsealant.
2. Maskthejointedgeswith
aquick-releasemaskingtape.
3. Applya1/8"beadofFoodgrade
siliconsealant.Applymoderate
pressureontheguntoensurethe
sealantllsthejoint.
4. Wait45-secondsforthesealant
tormslightly.Thenwipethejoint
withadampcloth.
 Donotwaitlongerthan1minutefor
thesealanttorm.Thesealant
willnotwipecorrectly.
5. Ifthesealantdrieslongerthan
1minute,DONOTtrytowipe
thejoint.Allowthesealant30
minutestodry,thencutthe
sealantoutofthejointand
beginagain.
6. Wait10-secondsafterwipingthe
joint,thenremovethemasking
tape.
7. Continuesealingthejoints.
 DONOTSEALmorethan
onejointatatime.Thesealant
willdryfasterthanyoucan
workthejoint.
