ATS Installation Manual

RELIANCE CONTROLS ARL SERIES AUTOMATIC TRANSFER SWITCH
INTRODUCTION
3
INTRODUCTION
Congratulations on your purchase of a Champion Power
Equipment (CPE) product. When contacting CPE about parts
and/or service, you will need to supply the complete model
and serial numbers of your product. Transcribe the information
found on your product’s nameplate label to the table below
CPE TECHNICAL SUPPORT TEAM
1-877-338-0999
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
PURCHASE LOCATION
SAFETY DEFINITIONS
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instructions or warnings they give are not substitutes for proper
accident prevention measures.
 DANGER
DANGER indicates a hazardous situation which,if not
avoided, will result in death or serious injury.
 WARNING
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
 CAUTION
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.

NOTICE
NOTICE indicates information considered important, but
not hazard-related (e.g., messages relating to property
damage).
 WARNING
Cancer and Reproductive Harm - www.P65Warnings.ca.gov