Automatic Transfer Switches

Champion Power Equipment, Inc.
12039 Smith Ave.–Santa Fe Springs, CA 90670–USA
[e-mail]–1-877-338-0999
Locate a certified Champion Home Standby Dealer and Installer by visiting:
www.championpowerequipment.com or emailing [e-mail]
Model
100199
100174
100177
100136
100176
100179
100291
100237
100295
100292
100294
Engine
439cc
Champion OHV
717cc V-twin
Champion OHV
754cc V-twin
Champion OHV
ATS
Generator only
ATS50 Emergency Essentials switch (NEMA 1)
ATS50 Emergency Essentials switch (NEMA 3R)
Generator only
ATS100 Emergency Essentials switch (NEMA 1)
ATS100 Emergency Essentials switch (NEMA 3R)
ATS200 Whole House switch with Demand Control (NEMA 3R service entry)
Generator only
ATS100 Emergency Essentials switch (NEMA 1)
ATS100 Emergency Essentials switch (NEMA 3R)
ATS200 Whole House with Demand Control switch (NEMA 3R service entry)
Generator Output (Propane/NG)
8,500W
7,5 0 0W
12,500W
11,000W
14,000W
12,500W
8.5 kW
12.5 kW
14 kW
™
50- 200 Amp
Automatic Transfer Switches (ATS)
Load Control Module (LCM)
Champion’s family of automatic transfer switches (ATS) and load
control module (LCM) give you options that range from 50 Amp
Emergency Essentials to 200 Amp Whole House solutions.
The SIMPLE SOLUTION
™
Our EMERGENCY ESSENTIALS switches (available in
either 50 Amp or 100 Amp options) allow you to power
select, key appliances during a power outage (circuits
determined at the time of your initial installation).
Emergency Essentials is the cost effective way to
power the most important circuits in your home when
the power goes out.
...do you want EMERGENCY ESSENTIALS
or WHOLE HOUSE with DEMAND CONTROL
With our WHOLE HOUSE with DEMAND CONTROL (available only in a 200 Amp option)
intelligent load management technology, your home’s power requirements are monitored
continuously. This ATS can back up your home’s entire 200 Amp distribution panel with the ability
to manage up to 8 high demand appliances for your Whole House power needs. Your home’s
circuits are divided into prioritized zones – from vital to managed. If your generator nears
maximum capacity, pre-designated, high demand appliances are managed to avoid overload. As
soon as demand lowers, the generator will automatically reacquire the appliances that are
managed. Appliances are managed and reacquired sequentially.
A LOAD CONTROL MODULE (sold separately) is used for larger loads such as electric range,
dryer or water heater. When choosing a generator for your Whole House needs, Demand Control
means that you do not always need to choose the largest generator.
WHOLE
HOUSE
There are T WO WAYS to control power distribution in your home:
Intelligent Load Management Technology
DEMAND CONTROL
or
WITH
It’s your choice...