Automatic Transfer Switches

WHOLE HOUSE
(intelligent load management
for up to 8 appliances)
EMERGENCY ESSENTIALS
(for select circuit installation only)
Manage up to 50 amp load
(sold separately)
ATS/LCM SPECIFICATIONS
Voltage (single phase)
Amperage
Service entry rated
Available Circuits
Frequency AC
Certification
NEMA 1 indoor enclosure model #
Dimensions (L[D] x W x H)
Weight
NEMA 3R outdoor/indoor enclosure model #
Dimensions (L[D] x W x H)
Weight
Application
99
No
12
100949
4.5 x 12.5 x 22.25 in.
22 lb.
100952
3.5 x 22.25 x 12.75 in.
30 lb.
200
Yes
Whole House
101380
6.25 x 18 x 23.25 in.
47.5 lb.
50
No
8
100947
4.5 x 12.5 x 22.25 in.
21 lb.
100950
5 x 13 x 23 in.
29 lb.
60 Hz
UL and cUL
120/240
50
100323
3.4 x 5.2 x 8.2 in.
3.6 lb.
50100 20050
Champion Power Equipment, Inc.
12039 Smith Ave.–Santa Fe Springs, CA 90670–USA
hsb@cpeauto.com–1-877-338-0999
Locate a certified Champion Home Standby Dealer and Installer by visiting:
www.championpowerequipment.com or emailing hsb@cpeauto.com
The SIMPLE SOLUTION
AUTOMATIC TRANSFER SWITCHES (ATS) / LOAD CONTROL MODULE (LCM)
This ATS includes two banks of four relays (15 Amp) for you to easily wire
in your low voltage controlled HVAC by simply breaking the thermostat
control line as shown below.
High demand appliances can be managed using a relay (up to 8)
connected to a LOAD CONTROL MODULE wired between the circuit
breaker in the distribution panel and the appliance.
HOME PANEL
HVAC ELECTRIC RANGEGENERATOR
ATS200 connection to HVAC ATS200 connection to ELECTRIC RANGE with LCM
METER
Low Voltage Control
Low Voltage
Control
Line Power
HOME PANEL
LCM
50
METER
Line Power
Line Power
WHOLE HOUSE
How is a
transfer switch with DEMAND CONTROL wired?
GENERATOR
ATS
RELAYS
200
ATS
RELAYS
200