Operators Manual

Model 100136
GENERAL INFORMATION
20
Part No. 101306
BATTERY CHARGER
The LEDs on the battery charger indicate the state of the
battery’s charge level. Battery charger rating 24 Vdc 1.6A.
(Figure 7)
NO CHARGE / PAS DE CHARGE /
SIN CARGA
AUTOMATIC BATTERY CHARGER /
CHARGE AUTOMATIQUE DE BATTERIE /
CARGADOR DE BATERÍA AUTOMÁTICO
Output: 24 Vdc 1.6 A
Producción: 24 V C.C. 1,6 A
Sortie : 24 V c.c. 1,6 A
Power: 80-125 Vac 1.0 A 50 / 60 Hz
Potencia: 80 - 125 V C.A. 1,0 A 50 / 60 Hz
Alimentation : 80-125 V c.a. 1,0 A 50 / 60 Hz
L N ADJ
E. O.
V
POWER / ALIMENTATION /
POTENCIA
OUTPUT / SORTIE /
PRODUCCIÓN
MODEL / MODÈLE / MODELO : 100482
POWER
ALIMENTATION
POTENCIA
Conforms to UL
Std. 1236
RECOGNIZED
COMPONENT
Black
PMS 109 C
PMS 485 C
PMS Reflex Blue C
Figure 7
POWER
Lit to indicate the battery is fully
charged.
Small Bar
Lit to indicate the battery is receiving a
trickle charge
Middle Bar
Lit to indicate current output is near
50%.
Large Bar
Lit to indicate the charger is operating
above 50% capacity.
NO CHARGE
Lit to indicate a battery charging
problem. If this LED is lit, the LED on
the Engine Controller module, “LOW
BATTERY” will also be lit.
EMISSION REQUIREMENTS
This engine-powered generator meets all United States
Environmental Protection Agency (EPA) Phase 3 requirements
and is approved for use in both the USA and Canada.
This generator is certified to operate on pipeline NG and LPG
(vapor) fuel for use as a stationary engine for standby power
generation. Federal and/or local laws may be violated if it is used
for any other purpose.
The maintenance schedule must be followed to ensure that the
engine complies with the applicable emission standards for the
duration of the engine’s life.
NOTICE
For Emission control devices and systems, read and
understand your responsibilities for service as stated in the
Emission Control Warranty Statement of this manual.