Operators Manual

100398 ENGLISH

ASSEMBLY

General Install Noted Cont’d.

Figure 16 - Approximate Mount Distance

Figure 15 - Tube Frame Type

26” Approx

Wide

Narrow

Equal

Round Tube Frame (Page 5)

Square Tube Frame (Page 6)

Polaris Tube Frame (Page 7)

Hybrid Mount Installation Instructions

General Install Notes

1. Be sure that when installing the mount it is centered

on your machine. Some frames are not perfectly

centered as shown in Figure 15.

2. The approximate distance that tab holes can be

from the front of the machine is 26 in. (66 cm)

as shown in Figure 16. Every machine can vary

because of ATV front contour.

3. Plow springs should not hit ATV when plow is angled

fully.

Take care when installing mount fasteners. Damage

could occur to the vehicle if installed improperly.

CAUTION

Round Tube Frame (Page 9)

Square Tube Frame (Page 10)

26 in. (66 cm)

Approx.

Polaris

Tube Frame (Page 11)