Full Product Manual

100424 - 27 TON FULL BEAM LOG SPLITTER

STORAGE

3. To extend the fuel storage life add a properly formulated

fuel stabilizer to the tank.

4. Ensure the fuel valve is in the “OFF” position.

Engines Stored for Over 30 Days

1. Add a properly formulated fuel stabilizer to the tank.

2. Run the engine for a few minutes so the treated fuel cycles

through the fuel system and carburetor.

3. Turn the fuel valve to the “Off” position.

4. Let the engine run until fuel starvation has stopped the

engine. This usually takes a few minutes.

5. The engine needs to cool completely before cleaning and

storage.

6. Clean the engine according to the maintenance section.

7. Change the oil.

8. Remove the spark plug and pour about 14.8 mL (

⁄2 ounce)

of oil into the cylinder. Using the Recoil, crank the engine

slowly to distribute the oil and lubricate the cylinder.

9. Reattach the spark plug.

! WARNING

Never store the log splitter inside next to appliances where

there is a source of heat or open ﬂame, spark or pilot light

because they can ignite gasoline vapors.

DO NOT store a log splitter near fertilizer or any corrosive

material. Even with an empty gas tank, gasoline vapors

could ignite.