Full Product Manual

100424 - 27 TON FULL BEAM LOG SPLITTER
SPECIFICATIONS
23
SPECIFICATIONS
Log Splitter Specifications
Ram Force .................................................27 Ton
Cycle Time ............................................ 11 seconds
Hydraulic Tank Capacity ........................... 4 gal (15.1 L)
Max Log Length ...............................23.8 in. (60.3 cm)
Max Log Weight .................................. 100 lb. (45 kg)
Coupler Ball Size ................................... 2 in. (5.1 cm)
Tire Size ......................................... 16 in. (40.6 cm)
Max towing speed ........................... 45 MPH (72 KM/H)
Cylinder size ...............3.9 in. × 22.6 in. (10 cm × 57.5 cm)
Cylinder rod size ................................... 1.6 in. (4 cm)
Gear Pump ................................................2-stage
Max pressure ............................................ 4100 psi
Max flow capacity ........................... 11 GPM (41.6 LPM)
Control Valve ............................... Detent (auto-return)
Gross Weight ...................503.3-537 lb. (228.3-243.6 kg)
Net Weight .....................................434.3 lb. (197 kg)
Height ..........................................39.3 in. (99.8 cm)
Width .........................................51.3 in. (130.2 cm)
Length ........................................89.5 in. (227.3 cm)
Engine Specifications
Model ................................................YF172F-001
Displacement .............................................. 224 cc
Type ................................................ 4-Stroke OHV
Start Type ................................................ Manual
Oil Specifications
DO NOT OVERFILL.
Type ..............................................See chart below
Capacity ........................................... 0.6 qt. (0.6 L)
-20 0 20 40 60
Ambient temperature / Temperatura ambiente / Température ambiante
Recommended Oil Type / Tipo de aceite recomendado / Type d’huile recommandé
80 100 120
-28.9
°F
°C -17.8 -6.7 4.4 15.6 26.7 37.8 48.9
10W-30
5W-30 Synthetic / Sintético / Synthétique
10W-405W-30
"
NOTICE
Weather will affect engine oil and engine performance.
Change the type of engine oil used based on weather
conditions to suit the engine needs.
Hydraulic Oil System
Capacity ........................................... 5 gal. (18.9 L)
For year round use in warmer climates (always ABOVE
32˚F/ 0˚C):
– ISO 32
– Universal Hydraulic Oil
For year round use in colder climates (BELOW 32˚F/ 0˚C):
– Automatic Transmission Fluid
Replacement filters:
– Fram PH9342
– K&N HP-2008
– Wix 51361
Fuel Specifications
Use regular unleaded gasoline with a minimum octane rating of
85 and an ethanol content of less than 10% by volume. DO NOT
USE E15 or E85. DO NOT OVERFILL.
Gasoline Capacity ................................ 0.9 gal. (3.4 L)
Spark Plug Specifications
OEM Type ........................................... NHSP F6RTC
Replacement Type ................... NGK BPR6ES or equivalent
Gap ...............................0.028-0.031 in. (0.7-0.8 mm)
Valve Specifications
Intake Clearance .............. 0.005-0.007 in. (0.13-0.17 mm)
Exhaust Clearance ............ 0.007-0.009 in. (0.18-0.22 mm)
"
NOTICE
A technical bulletin regarding valve adjustment procedures
is available at www.championpowerequipment.com.
Important Message About Temperature
Your product is designed and rated for continuous operation at
ambient temperatures up to 40°C (104°F). When your product
is needed it may be operated at temperatures ranging from 2°F
(-10°C) to 122°F (50°C) for short periods of time. If exposed to
temperatures outside this range during storage, it should be
brought back within this range before operation. In any event,
the product must always be operated outdoors, in a well-
ventilated area and away from doors, windows and vents.
"
NOTICE
When temperature is below 32ºF (0ºC) use Automatic
Transmission Fluid (Dexron-III or similar).