Operating Guide

100468 - Parallel Kit
9
"
NOTICE
While transporting the unit, there is a chance that the rear
door panel can become detached from the parallel kit unit. If
this happens, follow the steps below to reassemble the door
panel to the body.
1. Line up left door hinge pin with left side pin socket.
2. Place the right side door hinge pin into the door frame
guide slot. Using a steady force from the top right of the
door panel, slide door down until the hinge pin snaps into
place.
3. Make sure door closes properly and that top retaining pins
line up with the top pin sockets.