Full Product Manual

100565 - 2000W PORTABLE INVERTER GENERATOR
SPECIFICATIONS
32
# Part Number Description Qty.
79 81.050003.00 Wrist Pin, Piston 1
80 2.09.007 Circlip Ø13.5 x Ø1 2
81 81.123000.01 Ignition Coil 1
82 81.080003.00 Air Duct 1
83 81.081001.00 Muffler Protector Seal 1
84 62.081100.00 End Shield, Muffler 1
85 81.081003.00 Fastening Insert Piece 1
86 81.100001.00 Gasket, Exhaust Pipe 1
87 81.081002.00 Rubber Seal Sleeve 1
88 62.101100.00 Muffler Assembly 1
89 1.6175.06.3 Nut M6 2
90 81.101300.00 Spark Arrester 1
91 2.06.011 Clamp, Ø25 x b10 1
92 81.101501.00 Cap, Spark Arrester 1
93 62.081200.00 Middle Shield, Muffler 1
94 1.70.0616
Inside Hexagonal Bolt
M6 x 16
1
95 1.845.4817
Tapping Screw
ST4.8 x 17
4
96 62.081300.00
Terminal Shield,
Muffler
1
97 1.818.0306.1 Screw M3 x 6 2
98 62.132200.00 Stepper Motor 1
99 1.9074.1.0408 Screw M4 x 8 2
100 81.132100.00 Stepper Motor Base 1
101 1.9074.4.0535 Screw M5 x 35 2
102 62.130005.00
Support, Stepper
Motor
1
103 81.130010.00 Spring, Connector 1
104 81.130008.00
Connector, Choke
Valve Axis
1
105 81.131000.00 Carburetor 1
106 1.9074.3.0510 Screw M5 x 10 1
107 62.130007.00
Pressure Plate, Choke
Control Line
1
108 81.130006.00 Brace, Support Plate 2
109 62.080005.00 Plate, Middle Shield 1
110 1.845.4295
Tapping Screw ST4.2
x 9.5
1