SDS

Safety Data Sheet
Date of Issue: December-13-2016
File No.:
LY-SDS-161214
Page 10 of 12
This sheet is provided as technical information only. The information and recommendations set forth are made in good faith and
believed to be accurate as of the date of preparation. SICHUAN LIYANG INDUSTRY CO.LTD make no warranty, expressed or
implied, with respect to this information and disclaims all liabilities from reliance on it.
12. Ecological Information
Ecotoxicity：Very toxic to aquatic life with long lasting effects.
Persistence and Degradability: No information available
Bioaccumulation: No information available
Other adverse effects: No information available
13. Disposal Considerations
13.1Waste treatment methods
Disposal methods:
This material, as supplied, is not a hazardous waste according to Federal regulations (40 CFR
261). This material could become a hazardous waste if it is mixed with or otherwise comes in
contact with a hazardous waste, if chemical additions are made to this material, or if the
material is processed or otherwise altered. Consult 40 CFR 261 to determine whether the
altered material is a hazardous waste. Consult the appropriate state, regional, or local
regulations for additional requirements. Should not be released into the environment.
Contaminated Packaging:
Dispose of in accordance with federal, state and local regulations.
California Hazardous Waste Codes 141
This product contains one or more substances that are listed with the State of California as a
hazardous waste.
Chemical Name California Hazardous Waste
Sulfuric acid 7664-93-9 Toxic Corrosive
Lead 7439-92-1 Toxic
Antimony 7440-36-0 Toxic
14. Transportation Information
According to IATA DGR 57th Edition for transportation, assemble articles strictly according to
Hazardous Goods Transport Rules of Railway Station , The batteries should be securely packed
and protected against short-circuits. Examine whether the package of the containers are
integrate and tighten closed before transport. Take in a cargo of them without falling,
dropping, and breakage. Prevent collapse of cargo piles and wet by rain. The transport vehicle
and ship must be cleaned and sterilized otherwise it is not allowed to assemble articles.
During transport, the vehicle should prevent exposure, rain and high temperature. For
stopovers, the vehicle should be away from fire and heat sources. When transported by sea,
the assemble place should keep away from bedroom and kitchen, and isolated from the
engine room, power and fire source. Under the condition of Road Transportation, the driver
should drive in accordance with regulated route, don’t stop over in the residential area and
congested area. Forbid to use wooden, cement for bulk transport.