Operating Guide

17
100742 - 2 IN. (5 CM) SEMI-TRASH PUMP
OPERATION
3. Locate and slide the silver colored hose clamp (marked 52-
55) over the blue outlet hose.
4. Slide the blue discharge hose over the outlet hose fitting.

NOTICE
You may use a small amount of dish soap on the outlet hose
fitting to help ease the outlet hose on the fitting. Work the
soap around the fitting with your finger. Then work the blue
hose on the outlet, by twisting and turning until it’s fully
seated.
5. Slide the hose clamp in place about midway on the outlet
hose adapter as shown. Tighten to 7.4±1.5 lbf-ft (10±2 Nm)
with a 10mm wrench. The hose clamp should be placed
behind the outlet adapter barbs on the smooth part of the
adapter.
Connect the Suction Hose (Green) and Suction Filter
1. Locate the following: cam lock coupler (coupler and fitting
together) (A), 54-57 marked hose clamps (B), Teflon
®
tape
(C), green suction hose (D) and align for assembly.
A
B
C
D
2. Cut ties and uncoil the green hose and use some weight to
help straighten the hose out. Best to do this on a warmer day
in the sun.