Operators Manual

100784 - 3200 PSI PRESSURE WASHER
IMPORTANT SAFETY INSTRUCTIONS
9
Operation Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYMBOL MEANING
0° Nozzle
15° Nozzle
25° Nozzle
40° Nozzle
Soap Nozzle
SYMBOL MEANING
Choke/Run
Fuel valve OFF/ON
Fuel Gauge: Full
Fuel Gauge: Empty
Stop
Quickstart Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
2019-L-OP-A
2050-L-OP-A
1
4
5
6
7
2
3
K
ColorsLPN 2050-L-OP
Rev A
Size 22 x 126 mm
Artwork Notes
3mm corner radius; 2mm safe margin;
to be printed
on
WHITE
substrate.
Revision Changes
---
This artwork belongs to Champion Power Equipment. The contents are condential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
50%
152 2945 376
Set Up
1. Attach wand to trigger gun.
2. Attach high pressure hose to trigger gun.
3. Attach high pressure hose to pump.
4. Attach garden hose.
5. Attach nozzle to trigger gun.
6. Turn on water supply.
7. Press the trigger for 30 seconds.
Starting the Engine
8. Check oil level.
Recommended oil is 10W-30.
9. Move the fuel valve to the “ON” position.
10. Move the choke lever to the “CHOKE” position.
11. Pull the recoil cord.
12. Move the choke lever to “RUN” position.
Stopping the Engine
1. Move the fuel valve to the “OFF” position.
2. Press the engine switch to the “OFF position.
2014-L-OP-A
8
10W-30
9 10
11
12
1
2
K 376 485 152 CG1
ColorsLPN 2014-L-OP
Rev A
Size 135 x 40 mm
Artwork Notes
3mm corner radius; 2mm safe margin;
to be printed
on
WHITE
substrate.
Revision Changes
---
This artwork belongs to Champion Power Equipment. The contents are condential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.