Full Product Manual

10
11006 ENGLISH
SPECIFICATIONS
Performance Specifications
– Rated Pull .................................... 10,000 lb. (4,536 kg)
– Gear Reduction Ratio ....................................... 216:1
– Motor .......................... Series Wound Motor 3.6 HP/2.7 kW (12V DC)
– Duty Cycle ..................................... Intermittent Use Only
– Drum Size .................... 2.5 in. (D) x 8.8 in. (L) [63 mm (D) x 224.5 mm (L)]
– Cable ......................... 3/8 in. (D) x 85 ft. (L) [9.2 mm (D) x 26 m (L)]
– Gross Weight ...................................... 125.7 lb. (57 kg)
– Net Weight ....................................... 116.8 lb. (53 kg)
– Height ......................................... 10.5 in. (26.7 cm)
– Width .......................................... 5.6 in. (14.2 cm)
– Length ........................................ 21.9 in. (55.5 cm)
– Bolt Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 in. x 4.5 in. (25.4 cm x 11.4 cm)
Line Speed and Motor Current (First Layer)
Line Pull
LB 0 2,000 4,000 6,000 8,000 10,000
KG 0 907 1,814 2,722 3,629 4,536
Line Speed (12V DC)
FPM 15.7 9.8 7.2 5.9 4.9 3.9
MPM 4.8 3.0 2.2 1.8 1.5 1.2
Max Current A 115 175 220 280 320 400
Run Time* Minutes 1 1 1 1 1 1
Cooling Time** Minutes 5 5 5 5 5 5
Line Pull and Cable Capacity Per Layer
Line of Cable 1 2 3 4
Rated Line Pull
LB 10,000 8,000 6,600 5,600
KG 4,536 3,629 2,994 2,540
Cable Capacity
FT 18 39.4 64 85
M 5.5 12 19.5 26
– Use double line and snatch block for pulling loads over 50%.
* If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down for 5 minutes. Do not
pull for more than one minute at or near the rated load.
** Electric winches are designed and made for intermittent use and should not be used in constant duty applications.