Owner`s manual

14
1
2
3
4
5
WARNING: Read and understand the owner’s manual and all the safety precautions
and use the directions on page 12 and 13 before following these step-by-step instructions!
Plug the Hottop Coffee Roaster into the proper outlet. Press
START/POWER. The red LED above the START/POWER but-
ton will begin blinking.
Repeatedly press TEMP to cycle through the roast levels until
the desired level has been selected
Press START/POWER and the roasting process begins.
After a few minutes the machine signals you by beeping to indi-
cate that it is time to add the beans
OPTIONAL: The Hottop Coffee Roaster will begin beeping to warn
you 30 seconds before the roast will end. At this time, if you wish, you can
press the PLUS button to add 30 seconds to the roast time. This can be
done as many as five times, adding a total of 150 seconds to the original
roast level you chose step “1.” The beans will automatically eject when
the time runs out. As the beans begin to eject the automatic cooling cycle
will begin.
At any time during the roast, when you decide that the coffee is done
to your liking, press the EJECT button and the Hottop Coffee Roaster
will end the roasting process, eject the beans into the cooling tray, and the
cooling cycle will begin.
Hottop Coffee Roaster - KN-8828
Quick Reference Operating Instructions
WARNING: Never leave the roaster unattended during a roast!