INSTALLATION MANUAL AND USER'S GUIDE Integrated Multi-Zone Controller MDS-6A

MDS-6A

INSTALLATION MANUAL

6 Sources / 6 Zones

The MDS-6A enables you to independently listen to and control up to six differ-

ent audio sources (i.e. Tuner, CD, Tape Deck - and the audio signals from your

VCR, DVD, and Satellite Receiver) in six distinct listening areas or “zones”.

12 Channel x 40 WPC Power Amplifier

The MDS-6A features 12 channels of amplification capable of delivering 40

watts per channel into 8 ohms. The MDS-6A provides more than enough clean,

dynamic power to drive a house full of speakers all day long!

Compatible with MCS Zone Controllers and IR Receivers

The MDS-6A’s zones can be controlled using MCS-1A Zone Controllers,

MCS-2A Programmable Zone Controllers, and/or IR Receivers. Add multiple

MCS Controllers and/or IR Receivers for maximum flexibility.

User Feedback to All System Controllers

Unlike other basic multi-zone systems, the MDS-6A receives IR data and trans-

mits feedback to MCS Controllers. These features inform the user of which

Source is currently selected, Zone ON/OFF Status, Mute, Do-Not-Disturb,

Whole-House Music Status, and more!

MCS Controller RJ-45 Jacks and Removable Speaker

Terminals for Easy Connectivity

In addition to the six plug 'n play RJ45 jacks for MCS Controllers and IR

Receivers, the MDS-6A features installer-friendly removable speaker terminals

which accept up to 14 AWG wire.

6 Source-Specific IR Output Ports Plus 1”ALL” Port

Six source-specific IR output ports enable multiple ‘same make/model’ compo-

nents to be used without conflict or interference. An IR ALL port is also provided.

SECTION 1 - INTRODUCTION

1.1 - FEATURE OVERVIEW