Owners manual

6
DADO Button/Light
The DADO light will inform you of the connection and functional
status of your smoker:
Here’s what the DADO button does:
READY/ON
Once the appliance is online and
ready to accept a profile, the light
should be solid green.
This lets the user know the
appliance is on and ready.
READY/ON
Either after warming expires (15
min) or if the user removes food
from the bin the light should go
back to solid green.
COOKING
As a food starts cooking, the first
quadrant begins to flash orange.
This should continue through each
quadrant as the cook progresses. 1
flash then solid, 2 flash then
solid...
User can see that their food is
cooking and how far it is in the
process from a glance.
START COOKING
After a profile has been added to
the appliance the green light
should start flashing.
This should catch the user’s eye,
letting them know that something
needs to be done.
COOK IS DONE/WARMING
When cook is complete it should
change to a flashing orange ring.
This will again, grab the users
attention that an action needs to
be done.
CLEANING
Orange flashing propeller. Light up quadrants 2 & 4
(1 & 3 off), then quadrants 1 & 3 (2 & 4 off), repeat.
RUNNING CHIP BURN
Orange chasing. Light up quadrant 1 (2-4 off),
then quadrant 2 (1, 3-4 off) and so on.
ERROR
Red flashing.
CLEANING
ORANGE FLASHING propeller.
Light up quadrants 2 & 4 (1 & 3 off),
then quadrants 1 & 3 (2 & 4 off),
repeat.
RUNNING CHIP BURN
ORANGE CHASING. Light up
quadrant 1 (2-4 off), then quadrant
2 (1, 3-4 off) and so on.
READY/ON
Once the appliance is online and
ready to accept a profile, the light
should be solid green.
This lets the user know the
appliance is on and ready.
READY/ON
Either after warming expires (15
min) or if the user removes food
from the bin the light should go
back to solid green.
COOKING
As a food starts cooking, the first
quadrant begins to flash orange.
This should continue through each
quadrant as the cook progresses. 1
flash then solid, 2 flash then
solid...
User can see that their food is
cooking and how far it is in the
process from a glance.
START COOKING
After a profile has been added to
the appliance the green light
should start flashing.
This should catch the user’s eye,
letting them know that something
needs to be done.
COOK IS DONE/WARMING
When cook is complete it should
change to a flashing orange ring.
This will again, grab the users
attention that an action needs to
be done.
CLEANING
Orange flashing propeller. Light up quadrants 2 & 4
(1 & 3 off), then quadrants 1 & 3 (2 & 4 off), repeat.
RUNNING CHIP BURN
Orange chasing. Light up quadrant 1 (2-4 off),
then quadrant 2 (1, 3-4 off) and so on.
ERROR
Red flashing.
OFF
Not connected to the
Internet.
ON/SOLID
Connected to the
Internet.
ON/BLINKING
(ONCE PER SECOND)
Either needs to be paired to the
home Wi-Fi network or (if that has
already happened) you need to
push the DADO button to try and
reconnect.
ON/BLINKING
(TWICE PER SECOND “RAPID”)
This should only happen when you
have initiated a firmware update
from the app. In this case the DADO
button needs to be pushed.
15.124457 VESCONN 2015 Grilling Guide ENG.indd 6 8/5/15 10:21 AM