Product guide

Sideburner shelf assembly

CAUTION

SHARP EDGES! Wear gloves if necessary.

7mm flat

washer

7mm lock

washer

1/4-20x1/2”

screw

Repeat bracket screws on front leg

Remove the two screws and washers from the sideburner valve bracket.

Place sideburner valve under front of sideburner control panel so that

valve stem comes through large hole. Place Bezel on outer side of

control panel, and secure bezel and valve to panel using the two screws

and washers you removed from the valve bracket. Press control knob

onto valve stem.

Sideburner

valve bracket

First, remove

screws and

washers from

bracket.

463260307 • 17

Place sideburner shelf over left cart legs. Lip of shelf should fit between grill bottom and leg brace. Secure shelf brackets to

cart legs using two 1/4-20x1/2” screws, 7mm lock washers and 7mm flat washers. Fully tighten screws inside grill

bottom and at back of grill at this time. Refer to Steps 4 and 5.

Sideburner

bezel

Sideburner

control knob