Product guide

9
Insert sideburner into shelf, placing end of burner over sideburner
valve. Valve should be in center hole of burner tube. Make sure pin
on bottom of burner is in center hole in shelf bracket. Secure burner
to bracket with two #10-24x3/8” screws, 5mm lock washers, and
5mm flat washers. See illustration below for correct burner-to-
valve engagement.
Sideburner
Correct
burner-to-valve
engagement
Pin
in hole
5mm lock
washer
Valve should be
in center hole in
burner tube.
#10-24x3/8”
screw
10
Place sideburner wind diverter over sideburner (A). Align notch in diverter to fit around electrode. Place burner cap onto
sideburner. Attach sideburner cap clip (B) and sideburner cooking grate onto shelf. Beneath sideburner shelf, attach
sideburner ignitor wire to electrode (C).
Sideburner
ignitor wire
18 • 463260307
5mm flat
washer
B
Sideburner
cap clip
A
C