Product guide

Back panel

On back of the stove top, attach back panel to cart side panels using four #8x3/8" self-tapping screws.

Connect the wire from burner electrode into the back of Electronic ignition module, positions 1. Connect the two wires [(a) and

(b)] from switch wiring harness into the back of Electronic ignition module.

NOTE: Switch terminals are larger than electrode terminal and should only be installed in location shown as (a),(b).

Release cap and nut from electronic ignition module. Attach Electronic ignition module to front brace with the nut. Insert AAA

battery into module, negati v e end ﬁrst. Replace the cap.

Electronic ignition module

Back of electronic ignition module

Front brace

Cap

Nut

AAA battery

(+)

(-)

#8x3/8"self-tapping

screw

(a)

(b)

(-)