Product guide

LP CYLINDER IS SOLD SEPARATELY. Fill and leak check the cylinder before attaching to grill and regulator (see Use & Care
section). Once cylinder has been filled and leak checked, place cylinder into hole in bottom shelf. Make sure cylinder valve
is facing front of grill. Secure cylinder with cylinder screw under bottom shelf.
See Use & Care section of this manual to perform the burner Flame Check and for important safety instructions before
using.
CAUTION
Cylinder screw at rear of cart
Cylinder screw
Cylinder valve must face to front of cart once
tank is attached. Failure to install cylinder
correctly may allow gas hose to be damaged
in operation, resulting in the risk of fire.
Regulator
LP Cylinder
(not included)
Always keep LP cylinders in upright position during
use, transport and storage.
11
20
12
OPTIONAL
1. Remove the RH side shelf and brackets from your Grill:
Attaching the Griddle Cart to your full size Commercial Series grill.
a
b
c
2a. From outside the grill, insert the magnet shaft.
2b. From inside the grill, place the spring on the shaft,.
2c. Secure the magnet assembly with the hairpin clip.
followed by the washer..
2. Attach the magnet assemblies to your grill:
3. Attach the Griddle Cart to you Grill.
4. Complete!