Operating Guide

OM5050F.3 ™ & © Char-Griller / A&J Mfg. 14
Step 7: Install the Catch Pan onto the bottom of the Gas Grill Body by sliding the Catch Pan
underneath the Grill Body bottom. Making sure that the Brackets on the Catch Pan rest on top
of Slider Brackets. Slid the Catch Pan all the way till you can hang the Catch Pan side bracket
onto the Stopper Bracket.
Catch Pan
Stopper Bracket
Slider Bracket
Gas Grill Body
Step 8: Install Side Burner Body/Control Panel Assembly onto the Gas Grill Body. Lay down
the Side Burner Body Assembly that connect with the Control Panel on the floor and attach the
Control Pane to the front of the Grill Body with four 1/2” Hex Bolts and four Lock Washers (two
Hex Bolts and two Lock Washers on each side). Then attach the Side Burner Body Assembly on
the side of the Gas Grill Body.
Hex Bolts
Lock Washers
Hex Bolts
Side Burner Body
Gas Grill Body
Control Panel