Operating Guide

OM5050F.3 ™ & © Char-Griller / A&J Mfg. 15

Step 9: Install the Burners into the Gas Grill Body by inserting the IGNITER WIRES and Burn-

ers through the open holes at the front of the Grill Body from inside of the Grill Body, see figure

9A. (NOTE: IGNITER MUST BE ON BOTTOM SIDE OF BURNER). The BURNER with the longer wire

goes on the right side of the GRILL BODY. Making sure that the Valve goes inside each burner,

see figure 9B. Then secure the Burners to the Grill Body with the screws provided, see figure

9C.

Figure 9A

Figure 9B

Figure 9C

Valve

Burner

Screw

Burner

Igniter with Wire