Operating Guide
OM5050F.3 ™ & © Char-Griller / A&J Mfg. 31
• Remove grease collector.
• Remove cooking grates and heat shield.
• Remove burner by unscrewing nut from beneath burner “foot” using a screw-
driver and pliers.
• Lift burner up and away from gas valve orifice.
• Clean inlet (venturi) of burner with small bottle brush or compressed air.
• Remove all food residue and dirt on outside of burner surface.
• Clean any clogged ports with a stiff wire (such as an opened paper clip)
• Inspect burner for any damage (cracks or holes). If damage is found, replace
with new burner. Reinstall burner; check to insure that gas valve orifices are cor-
rectly positioned inside burner inlet (venturi). Also check position of spark elec-
trode.
Cleaning the Burner Assembly