Operating Guide

OM5050F.3 ™ & © Char-Griller / A&J Mfg. 8
¼-20x 1 ½” BOLT………....8 PCS
¼-20x 2 ¼” BOLT……….....8 PCS
¼-20x ½” BOLT….............. 33 PCS
2/5” FLAT WASHER………....2 PCS
¼” FLAT WASHER…………….18 PCS
¼-20 HEX NUT……………......27 PCS
¼” LOCK WASHER…………...35 PCS
HINGE PINS…………..............2 PCS
LARGE HAIR COTTER PIN…..2 PCS
SMALL HAIR COTTER PIN…...3 PCS
CENTER HINGE PIN……………..1 PC
SCREW……………………….....….3 PCS
#10-24 x 0.40” BOLT…...…....6 PCS
Assembly: Requires 2 people. Get another person to help. Tools Needed: Pliers, Phillips Head
Screwdriver and a 7/16” Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon may prohibit
parts from fitting together. All Hex Nuts should be on the inside of the grill unless stated other-
wise. Unpack all contents in a well cleared and padded area. Estimated Assembly Time: 45
minutes STOP! Do Not Return to Store. If you are missing parts or need assistance please
email us at [e-mail] or call 912-638-4724. Do not attempt assembly if you are
missing parts.
Hardware: 551030