Instructions / Assembly

C-4
Lighting Burner
with a Match
1. Open grill hood.
2. Push in and rotate knob counterclockwise to
HI position.
3. Place match in match holder installed on the side
of the grill housing. Once lit, place ame through
cooking grates near burner ports, as shown. Burner
should light immediately.
4. Adjust knobs to desired cooking settings.
Observe Flame Height
When Lit
Open Flavor Drawer™ so that you can see burner
ames below. Flame should be blue and yellow in color
and approximately 1/2 in. - 3/4 in. (1.2 cm - 1.9 cm)
tall on HI setting.
Disconnecting the
Gas Cylinder
1. Turn all control knobs to the OFF position and turn the handle on the
gas cylinder clockwise until it stops.
2. Turn coupling nut on regulator in a counter-clockwise direction until
regulator is released from threaded gas cylinder valve nozzle.
3. Place the protective cap over gas cylinder gas nozzle.
Storage of Appliance
Storage of an appliance indoors is only permissible if the cylinder is disconnected and removed
from the appliance. When the appliance is not in use, it should be covered and stored in a dry,
dust-free environment. To maximize life of the grill, use a custom-t Char-Griller Cover
(Model #7455).
Gas Cylinder
The gas cylinder should not be dropped or handled roughly! If the appliance is not in use, the cylinder
must be disconnected. Replace the protective cap on the cylinder after disconnecting the cylinder from
the appliance.
High
Low