Instructions / Assembly

C-6
FLAVOR DRAWER™
OPERATING INSTRUCTIONS
Gas-Assisted Charcoal Lighting
Instructions
1. To start a gas-assisted charcoal re, place up to 3 lbs. (approx. 50-60 briquettes) of charcoal in the
Flavor Drawer™, divided equally between each of the Wood Product Zones. Only place charcoal
in the three Wood Product Zones (Identied below). Do not place briquettes in the space on the far
edges of the drawer.
2. Using the Gas Operation instructions, follow the steps for lighting the Main Burners on HI.
3. After the briquettes are glowing red (typically after 5-6 minutes), turn the Main Burners to OFF.
4. Once the briquettes ash over or turn gray, spread them out, close the drawer and begin cooking.
5. If necessary, use tongs to move coals for even heat.
CHARCOAL OPERATION
Wood Product Zones