Owner Manual

B-3

Step 1

Place GRILL BODY upside down and install LEG BRACKETS with three (3) ½ inch hex bolts

each. Next install LEGS (3) with two (2) ½ inch hex bolts and two 1/4 inch lock washers each into

LEG BRACKETS, DO Not Tighten Bolts Until After Step #3. Screw CASTER onto rear leg, lock

CASTER before tightening. Make Sure the leg with the caster is in the back and wheel support

braces on the front legs are facing outward.

Step 2

Attach BOTTOM SHELF to LEGS with five 1/2 inch hex bolts and lock washers.

Leg Bracket

Bottom Shelf

Axle

8” Wheel

Grill Body

Caster

Step 3

Insert AXLE through front LEGS and BOTTOM SHELF. Tighten all bolts.