Owner Manual

B-7

Step 9

Position O-Ring on bottom of damper by rolling it up to the bead. With O-Ring in position, install

DAMPER with two (2) 1/2 inch bolts from inside the HOOD. Damper coating will scratch with use.

This does not affect the function or performance of the damper. Next, install THERMOMETER

GASKET, THERMOMETER, and BEZEL with wing nut, as shown below.

Damper

Hex Bolt

O-Ring

Bezel

Thermometer

Gasket

Step 10

Install: FIRE BOWL, FIRE GRATE, COOKING GRATES and WARMING RACK inside of the

lower body.

NOTE: Heat Gauge:

This heat gauge is accurate to +/- 10% of

the actual temperature. We suggest verify-

ing this with your oven. You will not be able

to adjust / calibrate the AKORN heat gauge,

but you will be knowledgeable as to its de-

gree of accuracy.

If you require precise temperature control,

we recommend using a digital meat ther-

mometer.