Instructions / Assembly

OM2137B.1 ™ & © Char-Griller / A&J Mfg. 3
ASSEMBLY INSTRUCTIONS
Read all safety warnings and instructions carefully before
assembling and operating your grill.
IMPORTANT HINT: DO NOT TIGHTEN ANY NUTS AND BOLTS UNTIL
GRILL IS FULLY ASSEMBLED.
(Estimated Assembly Time: 45minutes)
1. Assembly requires 2 people. Get another person to Help. For easiest assembly
use a HAMMER, PLIERS and a 7/16" NUT DRIVER. NOTE: Do Not tighten any
bolts unless instructed to do so. Tightening too soon may prohibit parts from Fit-
ting together. All Hex Nuts should be on the Inside of the grill unless stated oth-
erwise. Unpack all contents in a well-cleared and padded area.
2. Insert one LONG LEG into one SHORT LEG. See below. Repeat this step for the
other LONG and SHORT LEG.
3. Attach the LONG LEGS and SHORT LEGS to the base with four (4) lock washers
and 2 ½” Bolts and four (4) hex nuts as shown below.
Short Leg
Long Leg