How to Guide
25
PVC 4112 1
1
⁄2
”
x10’ 04178 1.900 0.145 38.1
PVC 4112 1
1
⁄2
”
x20’ 04177 1.900 0.145 38.1
PVC 4200 2
”
x10’ 04174 2.375 0.154 51.2
PVC 4200 2
”
x20’ 04173 2.375 0.154 51.2
PVC 4300 3
”
x10’ 03934 3.500 0.216 105.0
PVC 4300 3
”
x20’ 03935 3.500 0.216 105.0
PVC 4400 4
”
x10’ 03936 4.500 0.237 146.0
PVC 4400 4
”
x20’ 03937 4.500 0.237 146.0
PVC 4600 6
”
x10’ 03938 6.625 0.280 247.0
PVC 4600 6
”
x20’ 03939 6.625 0.280 247.0
PVC 4800 8
”
x20’ 03941 8.625 0.322 371.0
PVC 4910 10
”
x20’ 03942 10.750 0.365 566.0
PVC 4912 12
”
x20’ 03943 12.750 0.406 755.0
NOTE: When ordering, please specify plain end or bell-end.
NSF Listed. Meets All Requirements of ASTM F 891.
PVC 4112B 1
1
⁄2
”
x10’ 12917 1.900 0.145 38.1
PVC 4200B 2
”
x10’ 12916 2.375 0.154 51.2
PVC 4300B 3
”
x10’ 12915 3.500 0.216 105.0
PVC 4300B 3
”
x20’ 04782 3.500 0.216 105.0
PVC 4400B 4
”
x10’ 04783 4.500 0.237 146.0
PVC 4400B 4
”
x20’ 04784 4.500 0.237 146.0
PVC 4600B 6
”
x10’ 09904 6.625 0.280 247.0
PVC 4600B 6
”
x20’ 04786 6.625 0.280 247.0
PRODUCT DATA
>> PVC Schedule 40 DWV Pipe
PVC Foam Core DWV Pipe
PVC SCHEDULE 40 FOAM CORE (WHITE) PLAIN END FOR NON-PRESSURE APPLICATIONS ASTM F 891
PART NO. NOM. SIZE UPC # AVG. OD (IN.) MIN. WALL (IN.) WT. PER
611942- 100 FT. (LBS.)
PVC SCHEDULE 40 FOAM CORE (WHITE) BELL-END FOR NON-PRESSURE APPLICATIONS
PART NO. NOM. SIZE UPC # AVG. OD (IN.) MIN. WALL (IN.) WT. PER
611942- 100 FT. (LBS.)
NOT FOR PRESSURE
Do not use PVC / ABS cellular core (foam core) pipe for
pressure applications. The use of cellular core pipe in
pressure applications may result in system failure and
property damage.
Testing with or use of compressed air or gas in PVC / ABS
/ CPVC pipe or fittings can result in explosive failures and
cause severe injury or death.
• NEVER test with or transport/store
compressed air or gas in PVC / ABS / CPVC
pipe or fittings.
• NEVER test PVC / ABS / CPVC pipe or
fittings with compressed air or gas, or air
over water boosters.
• ONLY use PVC / ABS / CPVC pipe for water
or approved chemicals.
• Refer to warnings in PPFA User Bulletin
4-80 and ASTM D 1785.